ESCUTCHEONS
|
| |
| EP-100A OBLONG ESCUTCHEON PLATE (1.90 INCH APPLICATION) |
|
 APPLICATION
This is an oblong polished stainless steel escutcheon plate and is suitable
for use in conjunction with new products as well as serving as a replacement
item. They are suitable for use in most geographic areas.
STANDARD FEATURES
The S.R.SMITH Oblong Escutcheon Plate is stamped of .023" (.58mm) polished,
304 stainless steel and is intended for use with 1.9" (48.7mm) tubing. A
unique pattern of bends provide the plate's substantial strength while a
series of securing tabs at the mounting point insure the snuggest possible
fit on 1.9" (48.26mm) outer diameter fixtures. The higher profile of this
plate allows coverage of a wide variety of anchors while its shape results
in the least possible intrusion into the walkway. This unit is packaged for
single unit sales.
NOTE: This escutcheon is not available in the Designer Series Colors.
|
|
|
| |
| EP-100F ROUND ESCUTCHEON PLATE |
|
 APPLICATION
This is a round polished stainless steel escutcheon plate and is suitable
for use in conjunction with new products as well as serving as a replacement
item. They are suitable for use in most geographic areas.
STANDARD FEATURES
The S.R.SMITH Round Escutcheon Plate (EP-100F) is stamped of .023" (58mm)
polished, 304 stainless steel and is intended for use with 1.9" (48.3mm)
tubing. The 4.5" (114.3mm) diameter of the plate covers most mounting
anchors/points while its round shape and low profile result in a symmetrical
walkway presentation. This unit is packaged for single unit sales.
DESIGNER SERIES™
This unit is available under the S.R.SMITH Designer Series™ in a variety of
Year 2000 color selections.
(See color swatches)
|
|
|
| |
| EP-103 ROUND ESCUTCHEON PLATE (1-5/8" APPLICATION) |
|
 APPLICATION
This is a round polished stainless steel escutcheon plate and is suitable
for use in conjunction with new products as well as serving as a replacement
item. They are suitable for use in most geographic areas.
STANDARD FEATURES
The S.R.SMITH Round Escutcheon Plate (EP-103) is stamped of .023" (58mm)
polished, 304 stainless steel and is intended for use with 1 5/8"
(1.63/41.3mm) tubing. The raised 1 3/8" (1.38"/34.9mm) high plate covers
most mounting anchors/points while its compact 3.25" (82.6mm) diameter
results in a clean walkway presentation. This unit is packaged for single
unit sales.
NOTE: This escutcheon is not available in the Designer Series Colors.
|
|
|
|
|
|
SNAP-TITETM ESCUTCHEON PLATE |
|
 STANDARD FEATURES
The S.R.Smith, Snap-Tite two-piece escutcheon is made of high-density
cycolac. This unique escutcheon is intended for use with 1.90" O.D.Tubing.
The 5.00 inch diameter of the plate covers most mounting anchors/points. The
escutcheon is available in chrome and Designer colors listed below.
|
|
|
|
|
|
|
|
AS-100A 4-INCH ALUMINUM ANCHOR SOCKET ..New
!! |
|
 
|
Standard Features
The 4" deep cast Aluminum Anchor Socket Assembly (AS-100A) provides a
suitable mounting point for most residential and many light to moderate
commercial fixtures of 1.90" outer diameter. The anchor is tapped for and is
provided with a .25" #20 (US threading) brass ground screw for bonding.
This unit is packaged for single unit sales. |
|
|
|
|
|
|
|
|
|
|
|
TREADS & STEPS |
|
|
|
|
|
|
|
LTDF-101 19-INCH ECONOLINE™ PLASTIC THREAD |
|
 APPLICATION
This is a white, injection molded plastic tread which serves as an original
equipment tread option for most S.R.SMITH residential ladders. They are
suitable for use in most geographic areas.
STANDARD FEATURES
The white, injection molded Econoline™ tread is 3" (76mm) in width at the
left and right edges of the tread and 3 3/8" (.38"/86mm) at the tread center
providing a wider (at center) foot rest for safety. It is 17.25" (438mm) in
length at the centerline of the tread to provide a nominal 19" (483mm)
centerline mounting distance for the anchors of the ladder. The tops, sides
and indented top surfaces of the treads feature a skid /slip-resistant
surface for further safety and additional durability. Because of its
reinforced mounting posts and a unique combination of a cross-hatch pattern
of reinforcing bars and a horizontal reinforcing bar, the Econoline™ tread
is the strongest and most durable tread available. This unit is packaged for
single unit sales and includes no mounting hardware.
Note: This tread is not available in the Designer Series Colors
|
|
|
|
|
|
|
|
LTDF-103 20-INCH ELITE™ STAINLESS STEEL TREAD |
|
 STANDARD
FEATURES
The 304 stainless steel polished Elite™ Tread is 3" (76mm) in width and
18.25" (464mm) in length at the tread centerline to provide a nominal 20"
(508mm) centerline mounting distance for the anchors of the ladder.
Strategic bends of the heavy-duty stainless steel provide the tread's
unmatched strength.
DESIGNER SERIES™
This unit is available under the
S.R.SMITH Designer Series™ in a variety of Year 2000 color selections.
|
|
|
|
|
|
|
|
LTDF-105-15 TILT 20-INCH ELITE™ STAINLESS STEEL TREAD |
|
APPLICATION
This is a polished stainless steel tread which serves as an original
equipment tread option for most S.R.SMITH residential and commercial
ladders. They are suitable for use in most geographic areas.
STANDARD FEATURES
The 304 stainless steel polished Elite™ Tread is 3" (76mm) in width and
18.25" (464mm) in length at the tread centerline to provide a nominal 20"
(508mm) centerline mounting distance for the anchors of the ladder.
Strategic bends of the heavy-duty stainless steel provide the tread's
unmatched strength. Contrasting beauty, sure-footing and secure mounting of
the Elite™ tread to the ladder frame is enhanced by a replaceable, black
non-skid, Cool-Touch™ injection molded, tread insert at the top and caps at
either end of the tread. This unit is packaged for single unit sales and
includes no mounting hardware.
DESIGNER SERIES™
This unit is available under the S.R.SMITH Designer Series™ in a variety of
Year 2000 color selections.
|
|
|
|
|
|
|
|
A42077-0 20-INCH BLOW MOLDED TREAD |
|
 APPLICATION
This is a white, blow molded plastic tread which serves as a mid-range
replacement tread. They are suitable for use in most geographic areas.
STANDARD FEATURES
The molded white, blow molded plastic tread is 4" (102mm) in width and 18"
(457mm) in length at the tread centerline to provide a nominal 20" (508mm)
centerline mounting distance for the anchors of the ladder. The top of the
tread features a series of textured protrusions to provide a
skid/slip-resistant surface for safety. Strength results from the tread's
1.75" (44.5mm) thickness and its double-fold underside walls. This unit is
packaged for single unit sales and includes no mounting hardware.
Note: This tread is not available in the Designer Series Colors
|
|
This may be Out of Stock or Discontinued. For more information please call us Toll
Free at 1.877.891.7665
|
|
|
|
|
BUMPERS
|
|
WRB-100 WHITE RUBBER BUMPER MALE |
|
 APPLICATION
This is a molded rubber bumper suitable for use in protecting finished and
tile wall faces, vinyl liners and fiberglass surfaces on residential and
commercial installations in most geographic areas.
STANDARD FEATURES
The molded White Rubber Bumper-Male has a 2.25" (57.2mm) diameter .5"
(12.7mm) flat protective face to meet the pool wall/surface. Overall height
of the bumper is 1.5" (38.1 mm). The bumper features a long tapered length
for easy and secure insertion into 1.9" (48.3mm) outer diameter tubing with
varying wall thicknesses from .049" to .065" (1.2mm to 1.7mm). This unit is
individually packaged for single unit sales.
*Replacement Treads & Bolt available
|
|
|
